SPARE PARTS

Everything you need to keep your Bairan Waste Oil Burner in perfect condition for many years to come

Page 1 of 2: 92 Items

1 2

Show All Products

Heater Tank Filter £3.30	Nozzle O Ring £0.76	Standard Nozzle 1.2mm all Bairan Burners £13.75 This is the 1.2mm nozzle fitted as standard to STW120/120P/133.2/146.2/146.3/ BW26	Nozzle 1.0mm Bairan Oil Burner £14.11


PE Cell ( Magic Eye ) £18.51	Ignition Electrodes £12.35	STW120 Brake Plate £16.70	Control Box MANUFACTURED BY DANFOSS £68.85


Nozzle 0.8mm ( Bairan Oil Burner ) £14.11	Nozzle Holder 120/120P £19.10	Oil Filter Bowl Insert ( Re usable ) £10.42	Compressor Gasket with Filter £5.35


Nozzle 1.5 mm Waste Oil burner nozzle £14.11	CARBON ROTOR INSERTS £21.88 These are the Carbon Rotor inserts for the STW 120P Compressor Rotor	Heater Tank Float Switch Assembly £36.75	Ignition Cable £5.45


Oil Feed Pipe c/w fittings £7.98	Oil Pump complete with Motor £158.78	Air Solenoid - STW120P £26.90	Fan Motor and Compressor - STW 120-P £187.80


Oil Filter complete with Element £28.60	STW 120P Air Conversion Kit £48.92	STW133/146 Electrodes £14.88 These are the Igniton electrodes for STW 133/146 Burners	Air Tube ( STW120 & 120P ) £9.00


Bairan STW 120P Compressor Renewal Kit £125.80 Bairan STW120P Compressor Reconditioning kit	Oil Pump Drive £3.56	Tank Heater Element (STW-120/P) £38.90	Thermostat (Complete) £38.85


7 Pole Connector (female) £5.85	Air Solenoid - STW120 £26.90	Braided Hose (1m) with Elbow £6.45	Fan Motor - STW120 £78.05


OIL PUMP ( New Type ) £54.00 This is the OIL PUMP only which fits the new type pump.	Pressure Gauge (Rear) £12.70	Start Capacitor (Large) £6.88	Water Trap £6.90


15mm Ball Valve ~~£3.96~~ £3.30	7 Pole Connector (male) £5.85	Air Regulator £9.60	Burner Adapter Flange STW120P/STW120 £14.45


Compressor End Cap £18.75	Compressor Foam Filter £3.90	Compressor Tube with Fitting £9.73	Control Box Back Plate [STW 120/133/146/BW26 £15.12


Heater Tank Thermal Cut Out £7.98	Multi Oil Bag Filters 100 Micron £4.95	Nozzle Heater (Round Type) STW120/120P £32.00	Overflow Prevention Kit £27.80 Oil Over flow Kit


Raw Oil Filter £25.00	STW 120 Fan £18.40	STW 146-2 Brake Plate £28.18	STW120/120P Bare Oil Tank £114.95 This is a bare Stainless Steel STW120/120P Oil Heater Tank


⅜" BSP Connector £0.55	⅜" Pipe End Cap BSP £0.56	Air Filter - STW 146 £11.90	Air Solenoid Connector Plug £3.40


Air Tube to Flexible Tube Connector £3.70	Bairan STW 120/133/146 Black Plastic Cover £12.28	Bairan STW120/120P Blast Tube £15.78	Bairan STW120P Compressor Motor £110.00


Burner Adapter Flange (STW146) £14.45	Capacitor End Cap (Large) £1.10	Capacitor End Cap (Small) £1.10	Compressor Ring (STW120P) £25.64


Compressor Ring End Cap £16.80 Compressor Ring End Cap	Connector from Compressor to Flexible Tube £3.69	Fan Motor Bearing £11.50	Float Switch Attachment Bracket £9.90


Level Float Switch £17.80	New Oil Pump Capacitor £12.40	Nozzle Heater STW146/2/3 also STW 133/2 £35.00	Nozzle Holder STW146-2 £26.70


Nozzle Holder STW146-3 £25.30	Oil Pump 4 Pole Connector Female £3.30	Oil Pump 4 Pole Connector Male £3.30	Oil Pump Seal £5.50


Pressure Gauge (Side) £12.70	PTFE Tape £1.00	Pump Heater £10.06	Rotor Nylon Drive Insert £6.05


Stainless Steel Oil Tank fully wired (Complete) £211.00	Start Capacitor (Small) £6.88	STW 146 -2 / 3 Fan £18.99	STW120P Rotor Complete with Vanes and Drive £69.60